10Gip-Cable

- Screened augmented category 6 cable features a center isolation member to maintain pair geometry before, during, and after installation for ideal NEXT performance
- Drain wire
- Aluminum foil tape shield
- Sequential measurement markings on jacket
- CMR, CM CMX and LS0H jacket options available

Cable Construction
- F/UTP
- 0.57mm (0.023 in.) (23 AWG) solid bare copper
- 7.4mm (0.29 in.) max jacket diameter
- 1.07mm (0.042 in.) max conductor insulation diameter
- Central isolation member
- Shield is an aluminum foil tape enclosing a 7-strand 0.05mm (0.002 in.) (24 AWG) tinned copper drain wire
Compliance
- ISO/IEC 11801:2002 Ed. 2 (category 6)
- ANSI/TIA/EIA-568-B.2-1 (Category 6)
- IEC 61156-5:2002 (Including transfer impedance and coupling attenuation)
- LS0H: IEC 60332-1, IEC 60754, and IEC 61034
- UL CM
- UL CMX
- UL CMR and CSA FT4

Cable packaged in a reel-in-a-box (305m) to protect product during shipping and facilitate tangle-free installation

Note:
Other cable lengths also available: Add “-5CR” for 500m (1640 ft.) Reel, “-1KR” for 1000m (3,281 ft.) Reel